Spesifikasi Garlock Gylon 3545 PTFE with Barium

Jual Garlock Gylon 3545 PTFE

Microcellular PTFE Gasketing for Low Bolt Load Applications The GYLON® Style 3545 is a highly compressible microcellular PTFE with a rigid PTFE core for improved handlability.

The GYLON® 3545 designed to compress and conform to irregular or damaged surfaces, making it suitable for flanges that generate lower compressive stresses, such and glass-lined flanges and equipment.

FEATURES and BENEFITS Tight seal Highly compressible PTFE outer layers seal under low bolt load Compressible layers conform to irregularities, especially on warped, pitted, or scratched flanges Rigid PTFE core reduces cold flow and creep Withstands a wide range of chemicals Can be cut from larger sheets, reducing inventory costs and expensive downtime Rigid PTFE core facilitates installation, especially on large diameter flanges and hard-to-reach areas Will not support flame Will not support bacterial growth

SPECIFICATIONS Available in sheet or cut gasket form White Microcellular PTFE Conforms to FDA regulations and ABS specification Min.

emperature: -450°F / -268°C Max. Temperature: 500°F / 260°C Max. Pressure: 1200 PSI / 55 bar

Maximum PxT 1/16: 350,000 °F x PSIG / 12,000 bar

x °C Maximum PxT 1/8: 250,000 °F x PSIG / 8,600 ba

r x °C APPLICATIONS Strong caustics Strong acids Hydrocarbons Chlorine Cryogenics Glass-lined equipment† Low bolt load applications* *For flat face flanges, a minimum compressive stress of 1,500

psi is recommended on the contacted gasket area for 150 psig liquid service. Consult with the flange manufacturer to confirm that adequate compressive stress is available. † When sealing uneven flanges, gasket must be four times thicker than maximum gap between flanges.gasket

Karet Gasket dan Material Gasket